It should be a bare USB 3.0 female to whatever number of pins female header cable. For any one with a NEC/Renesas USB 3.0 Issue there are two solutions not yet available from Asus. if you are listening why are we not being provided with these updated from our own manufacturer?Skill Ripjaws Z 2133Mhz 2x Samsung 840 Pro 256GB SSD. 1 500gb WD Veloci Raptor Antec Gamers edition Bronze rated PSU 750 Watts Corsair H80 Closed loop CPU cooler Dragon Test Bench Case Just in case anyone reading this post nearly makes the same mistake as I did, the Maximus IV Gene3-z/Gen 3 (not to be confused with the Extreme Z motherboard) uses an Asmedia USB 3 controller and not a Renesas one.
Be sure to discharge any static electricity you have on something besides your computer before touching any of the internal areas of the computer.
Once you get the case open you need to check to make sure that you have an unused PCI slot inside your computer.
Of course this also depends on how fast your particular device was designed to go.
With most USB 2.0 capable devices, however, you will see a big difference between plugging it into a USB 1.1 port and a USB 2.0 port.
A USB hub is also a good way to get more USB ports if you happen to run out.
First off, you will need to shut down your computer and then unplug it from the wall. This can be difficult because computer cases are not created equal.
There are USB 2.0 PCMCIA cards that you can use to add USB 2.0 to your older laptop.
Amazon has an excellent variety of PCMCIA USB 2.0 Adapters that are affordable and very easy to install and use.
"Those who are willing to give up freedom for security deserve neither" Ben Franklin Asus Maximus IV Extreme Z Intel I7-2700K OC to 4.7 @ 1.330 volts 2X EVGA 660TI SLI G.